DZ BOAT -WITH AUTO PILOT. - -
The DZ bait boat is the latest in fishing technology. It is the best boat available. Quiet and fast with brush less motors and long run time. Lithium batteries gives 6 hours runtime. 120 meters per minute no load speed. 80 meters per minute fully loaded.
The range of this boat is over 500m, the fish finders have a range of 300m+/-.
The boat is ready to go.
You do not require any third party "speed kits" or "range extenders".
You do not require and software updates.
All sales and service in the UK.
5.8GHz 6 channel radio handset offering unparalleled interference free performance.
Radio controlled lights. Super bright led bar at front and port and starboard rear lights.
Radio controlled, motorized central hopper. Closes automatically after 10 seconds.
Independent rig release located at rear of boat.
The radio requires 4XAA batteries.
GPS auto pilot. Can save up to 80 fishing points. Automatically save (o) point, this is when the boat is dropped in the water. Alternatively save starting point. This is where the boat will return to when called. Also will return to this point if signal is lost or when battery level is too low. The boat can sail to any of the saved fishing spots that are within its working range and can sail from one fishing point to another. With the optional 2 rear hopper you can drop bait at 3 different spots in one run. The GPS system displayed on the handset can show distance to recorded fishing spots and longitudinal and latitude coordinates.
There is NO BAG INCLUDED.
BAIT BOAT KIT MK4
Bait boat kit.
All parts have been precision made. Most holes required are already done and many of the holes have brass threaded inserts.
The kit comprises of
Upper and lower hull with battery covers with mounting screws.
Hinged hopper doors with mounting screws.
Magnets and screws for battery covers.
Slow release servos and hopper release arms with mounting screws.
Brushless motors with propellers and motor mounts with screws.
Wiring loom with led's, voltage sensors, radio controlled switch and panel mounted fuse.
LED mounting bezels
2 brushless esc's programmed.
Anodized aluminium weed guards and mounting screws.
Anodized aluminium handle with mounting screws.
To complete this kit you will require a FS-i6X handset with a fs-iA10b receiver. Instructions will be provided. 12v battery source with xt60 connectors and charger. These are not provided
Tools required phillips screw driver small and medium, allen key set (metric), silicone sanitary sealant, Wire stripper. soldering iron and solder. heat shrink tubing, super glue and cable ties and mounts.
Full instructions will be sent to you via video link.
If you are buying boat which is very slow ask yourself why they have reduced the speed. Generally it will be to mask the size of the battery they are selling you.
The hopper can be configured into 1 large hopper or by inserting a central divide split into 2 smaller hoppers. These hoppers can be opened/closed independently via the handset. To insert/remove the centre divide the handle must be removed and replaced. Your boat will be supplied in the one hopper configuration. The maximum payload is 3kg.
The handset displays the boat battery voltage and will alarm when ready to change. There is also an optional onboard voltage display.