Repair
£75 + parts, includes return UK mainland shipping.
If you would like to send your boat in for service/ repair please send to.
BIG LAKE BAIT BOATS LTD
UNIT 18B
HOLME MILLS INDUSTRIAL ESTATE
HOLME
CUMBRIA
LA61RD
Also include cover note with contact details
Your boat will be returned within 5 working days after receiving.
RECOMMENDED COURIER
Follow the link below, UPS is normally the best option.
£75 + parts, includes return UK mainland shipping.
If you would like to send your boat in for service/ repair please send to.
BIG LAKE BAIT BOATS LTD
UNIT 18B
HOLME MILLS INDUSTRIAL ESTATE
HOLME
CUMBRIA
LA61RD
Also include cover note with contact details
Your boat will be returned within 5 working days after receiving.
RECOMMENDED COURIER
Follow the link below, UPS is normally the best option.
Binding Procedure MK3/4
1.Put binding plug into BATT channel on receiver. The receiver is located in the boat starboard side towards the back.
2.Press and hold the bind key button located to the left of the screen.
3.Screen should read RX binding.
4.Turn the boat on and the screen should briefly read binding ok.
5.Remove the binding plug.
6.The boat is now ready to use.
1.Put binding plug into BATT channel on receiver. The receiver is located in the boat starboard side towards the back.
2.Press and hold the bind key button located to the left of the screen.
3.Screen should read RX binding.
4.Turn the boat on and the screen should briefly read binding ok.
5.Remove the binding plug.
6.The boat is now ready to use.
Binding procedure mk1/2
- Place the bind plug in the receiver
- Put batteries in the boat and turn on.
- You will see a red led flashing fast on the receiver.
- Whilst pressing the bind button turn on your handset.
- The flashing led should now be on and not flashing.
- Pull the bind plug out.
- Turn both boat handset set off and then back on.
- Your boat is now ready to use
